An industrial client approached Tech Tube to fabricate high temperature cooling tubing. We began by prototyping the tubing through an exhaustive research and development process. Our final design replaced the original platinum metal with a special stainless steel material that resulted in an 80% savings.
After we arrived at the design, we put the tubing through an extensive fabrication process which included end forming, EDM wire, bending and forming. The tubing was then flattened into an oval shape and bent and drilled again, according to the customer’s specifications.
The final products had outside diameters of .252″, wall thicknesses of .020″ and lengths that ran from 4″ up to 32″. Throughout the fabrication process, we were able to hold tightest tolerances of ±.001”.
For more information about this project, please see the details below. To learn more about our other services, contact Tech Tube today.
|Product Description||This high temperature cooling tube was converted from precious metal tubing with extensive fabrication and high scrap rates to a finished part made 100% by Tech Tube. This resulted in a large cost savings as well as a more consistent part.|
|Capabilities Applied/Processes|| |
Tube End Forming
Research & Development
Flattening to Oval Shape
|Overall Part Dimensions||Wall Thickness: .020" |
Length: 4" through 32"
|Material Used||Tech Tube Portfolio Alloy|
|Industry for Use||Commercial/Industrial|
|Standards Met||Customer Specifications|
|Product Name||High Temperature Cooling Tube|