Capabilities Custom Shapes and
Tube Fabrication
Tube Drawing Research and
Development Services
portfolios Manufacturing of
Cobalt Cardiovascular
Stent Tubing for the
Medical Industry
Fabrication of a
High Temperature
Cooling Tube
Tube Drawing of
Stainless Steel
Chromatography
Tubing for the
Medical Industry
Tube Drawing of
Passivated Diagnostic
Probe for the
Medical Industry
AS 9100Registered Company ISO 9001:2008Registered Company ISO 13485:2003

Standard Tubing Specifications

Manufacturing Standards:

Tube OD Tube ID Tube Wall StraightnessA LengthA
Up to .100" ± .001"
Up to .100" ± .001"
Up to .005" ± .0003"
.0051" to .010" ± .0005"
.0101" to .020" ± .001"
.010" per 1' length
± 3.5' ± .010"
.101" to .250" ± .002"
.101" to .250" ± .002"
Up to .005" ± .0005"
.0051" to .010" ± .0008"
.0101" to .020" ± .001"
.0201" to .050" ± 10%
.010" per 1' length
± 3.5' ± .010"
.251" to .500" ± .003"
.251" to .500" ± .003"
Up to .005" ± .0005"
.0051" to .010" ± .0008"
.0101" to .020" ± .001"
.0201" to .050" ± 10%
Over .0501" ± 10%
.010" per 1' length
± 3.5' ± .010"
.501" to .750" ± .004"
.501" to .750" ± .004"
.0101 to .020" ± 10%
.0201" to .050" ± 10%
Over .0501" ± 10%
.010" per 1' length
± 3.5' ± .010"
.751" to 1.25" ± .005"
.751" to 1.25" ± .005"
± .005" ± 10%
.0201" to .050" ± 10%
Over .0501" ± 10%
.010" per 1' length
± 3.5' ± .010"
A: Custom tolerances are available upon request.
B: SPC data (Cp, Cpk, s, etc.) and # of samples per lot can be tested/reported upon customer request.
* Condition Tempers: Standard tempers are annealed, 1/4, 1/2, and full hard. Custom tempers are available upon request.
** % Concentricity can be calculated by request using the following formula: 2x ((Max wall -Min wall)(Max wall +Min wall))x 100

Shape: Round, flat, oval, elliptical, rectangular, square, and custom.