Products & Services
General Information
Stainless steel alloy, high temperature alloys, corrosion resistant alloys, and nickel alloys are available.
Standard and specialty tubing are available in a variety of alloys to meet your specific applications.
Most of these are available in seamless, welded, or drawn tubing.
Production Capabilities
Manufacturing Processes
Metal Processing
-
Tube Rolling
-
Wire Drawing
-
Tube Drawing - round and shaped cross sections
-
Post processing including flaring, flanging, bending, etc.
-
EDM Machining
Powder Processing
-
MIM (Metal Injection Molding)
| Manufacturing Standards: | |||||||||
| Tube OD | Tube ID | Tube Wall | StraightnessA | LengthA | |||||
| Size | ToleranceA,B | Size | ToleranceA,B | Size | ToleranceA,B | Random | Exact | ||
| Up to .100" | +/- .001 | Up to .100" | +/- .001 | Up to .005" | +/- .0003 | .010" per 1' length | +/- 3.5' | +/- .010" | |
| .0051" to .010" | +/- .0005 | ||||||||
| .0101" to .020" | +/- .001 | ||||||||
| .101" to .250" | +/- .002 | .101" to .250" | +/- .002 | Up to .005" | +/- .0005 | .010" per 1' length | +/- 3.5' | +/- .010" | |
| .0051" to .010" | +/- .0008 | ||||||||
| .0101" to .020" | +/- .001 | ||||||||
| .0201" to .050" | +/- 10% | ||||||||
| .251" to .500" | +/- .003 | .251" to .500" | +/- .003 | Up to .005" | +/- .0005 | .010" per 1' length | +/- 3.5' | +/- .010" | |
| .0051" to .010" | +/- .0008 | ||||||||
| .0101" to .020" | +/- .001 | ||||||||
| .0201" to .050" | +/- 10% | ||||||||
| Over .0501" | +/- 10% | ||||||||
| .501" to .750" | +/- .004 | .501" to .750" | +/- .004 | .0101 to .020" | +/- 10% | .010" per 1' length | +/- 3.5' | +/- .010" | |
| .0201" to .050" | +/- 10% | ||||||||
| Over .0501" | +/- 10% | ||||||||
| .751" to 1.25" | +/- .005 | .751" to 1.25" | +/- .005 | .0101" to .020" | +/- 10% | .010" per 1' length | +/- 3.5' | +/- .010" | |
| .0201" to .050" | +/- 10% | ||||||||
| Over .0501" | +/- 10% | ||||||||
| A: Custom tolerances are available upon request | |||||||||
| B: SPC data (Cp, Cpk, s, etc.) and # of samples per lot can be tested/reported upon customer request. | |||||||||
| * Condition Tempers: Standard tempers are annealed, 1/4, 1/2, and full hard. Custom tempers are available upon request. | |||||||||
| ** % Concentricity can be calculated by request using the following formula: 2x ((Max wall -Min wall)(Max wall +Min wall))x 100 | |||||||||
Machining and Tooling
3 and 4 Axis Milling
-
Fixtures
-
Parts Machining
Full EDM Capabilities
-
Die Sinking and Plunging
-
Wire Cutting
Electrolytic Cutting
All tooling and fixtures are produced in-house
Capable of manufacturing intricate geometric shapes
Project Management
We can provide project management and support throughout the entire product development.
-
Material Recommendations
-
Creation of raw materials and specifications, as well as, metallurgical evaluations.
-
Procurement of all materials with design and validation of thermo-mechanical processing.
-
Test methods for verification of final product compliance with specifications.
-
Continuous process improvement during the product life cycle.
Tech Tube